Cisco NCS 5500 Series Command Reference

DescriptionName
Internet Control Message Protocolicmp
Internet Gateway Message Protocoligmp
Cisco IGRP Routing protocoligrp
IP in IP tunnelingipinip
Any IPv4 protocolipv4
Any IPv6 protocolipv6
Any MPLS packetmpls
KA9Q NOS Compatible IP over IP Tunnelingnos
Open Shortest Path First, Routing Protocolospf
Payload Compression Protocolpcp
Protocol Independent Multicastpim
Stream Control Transmission Protocolsctp
Transport Control Protocoltcp
User Datagram Protocoludp
Task ID
OperationsTask
ID
read,
write
qos
Examples
In this example, all TCP packets belong to class class 1:
RP/0/RP0/CPU0:router(config)# class-map class 1
RP/0/RP0/CPU0:router(config-cmap)# match protocol tcp
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
24
QoS Classification Commands
match protocol

Cisco NCS 5500 Series Specifications

General

Series	NCS 5500
Category	Network Router
Operating System	Cisco IOS XR
Product Type	Modular Router
Form Factor	Rack-mountable
Purpose	High-performance routing for service providers and large enterprises
Interface Types	Ethernet
Redundancy	Redundant power supplies and fan trays
Port Density	Varies by model; high-density configurations available
Routing Protocols	BGP, OSPF, IS-IS, MPLS
Power Supply Options	AC and DC power supplies available
Management	CLI, SNMP, NETCONF