Cisco NCS 5500 Series Command Reference

• Where LR is line rate of the target on which service policy "sample_policy" is attached.
• 50 percent is unallocated bandwidth.
Task ID
OperationsTask
ID
read,
write
qos
Examples
This example shows how to set the queue limit for a class to 1000000 packets for policy map policy1:
RP/0/RP0/CPU0:router(config)# policy-map policy1
RP/0/RP0/CPU0:router(config-pmap)# class class1
RP/0/RP0/CPU0:router(config-pmap-c)# queue-limit 1000000
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
70
Congestion Avoidance Commands
queue-limit

Cisco NCS 5500 Series Specifications

General

Series	NCS 5500
Category	Network Router
Operating System	Cisco IOS XR
Product Type	Modular Router
Form Factor	Rack-mountable
Purpose	High-performance routing for service providers and large enterprises
Interface Types	Ethernet
Redundancy	Redundant power supplies and fan trays
Port Density	Varies by model; high-density configurations available
Routing Protocols	BGP, OSPF, IS-IS, MPLS
Power Supply Options	AC and DC power supplies available
Management	CLI, SNMP, NETCONF