Cisco Nexus 1000V - Page 136

10-6
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 10 Port Profiles
Port Profile Troubleshooting Commands
For detailed information about show command output, see the Cisco Nexus 1000V Command Reference.
EXAMPLES
Example 10-1 show port-profile Command
switch# show port-profile
port-profile 1
type: Vethernet
description:
status: enabled
max-ports: 1
min-ports: 1
inherit:
config attributes:
switchport mode access
ip port access-group acl1 in
capability vxlan
no shutdown
evaluated config attributes:
switchport mode access
ip port access-group acl1 in
capability vxlan
no shutdown
assigned interfaces:
port-group: 1
system vlans: none
show port-profile-role Displays the port profile role configuration.
See Example 10-7 on page 10-8.
show port-profile-role users Displays the available users and groups.
See Example 10-8 on page 10-9.
show port-profile sync-status [interface
if-name]
Displays the interfaces that are not synchronized
with the port profile.
See Example 10-9 on page 10-9.
show port-profile virtual usage [name
profile-name]
Displays the port profile usage by interface.
See Example 10-10 on page 10-9.
show msp internal info Displays the port profile mappings on vCenter
server and configured roles.
See Example 10-11 on page 10-9.
show system internal port-profile profile-fsm Displays the port profile activity on the Cisco
Nexus 1000V, including transitions such as
inherits and configurations. If the following
displays, then all inherits are processed:
Curr state: [PPM_PROFILE_ST_SIDLE]
See Example 10-12 on page 10-13.
show system internal port-profile event-history
msgs
Displays the messages logged about port profile
events within the Cisco Nexus 1000V.
See Example 10-13 on page 10-14.
Command Purpose