Cisco Nexus 1000V - Page 231

22-13
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 22 System
Error Messages
ERROR: [VMWARE-VIM] A DVS switch with
name as switch already exists, cannot reconfigure
DVS test. A specified parameter was not correct.
Spec.name
This error indicates that a DVS with the same
name already exists.
Warning: Operation succeeded locally but update
failed on vCenter server.[VMWARE-VIM]
DVPortgroup test port 0 is in use. The resource
vim.dvs.DistributedVirtualPort 0 is in use.
This warning is displayed when the VSM tries to
delete the port profile if the VSM is not aware of
the nics attached to the port groups.
Table 22-1 Error Messages on the VSM
Error Description