5-14
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 5 Upgrades
Problems with the GUI Upgrade
Step 4 You have completed this procedure. Return to the “Recovering a Primary VSM with Active Secondary”
section on page 5-12.
Powering Off the VSM
You can power off the newly created VSM.
Step 1 From the vCenter Server left-hand panel, right-click the VSM and then choose Power > Power Off.
The VSM shuts down.
Step 2 You have completed this procedure. Return to the “Recovering a Primary VSM with Active Secondary”
section on page 5-12.
Connecting the Port Groups
You can make sure that the port groups to the host connect when you power on the VSM.
Step 1 In vCenter Server, select the VSM and then choose Edit > Settings.
The Virtual Machine Properties dialog box opens.
Step 2 Select the Control port group and check the following Device Settings:
To Next Page
Loading...
