Cisco Nexus 3000 series - Grounding the Chassis; Grounding Procedures and Warnings

Send document comments to nexus3k-docfeedback@cisco.com
Contents
xii
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Additional References 7-18
Related Documents 7-19
Standards 7-19
Feature History for RIP 7-19
CHAPTER 8 Configuring Static Routing 8-1
Information About Static Routing 8-1
Administrative Distance 8-2
Directly Connected Static Routes 8-2
Fully Specified Static Routes 8-2
Floating Static Routes 8-2
Remote Next Hops for Static Routes 8-3
Virtualization Support 8-3
Licensing Requirements for Static Routing 8-3
Prerequisites for Static Routing 8-3
Guidelines and Limitations 8-3
Default Settings 8-3
Configuring Static Routing 8-4
Configuring a Static Route 8-4
Configuring Virtualization 8-5
Verifying the Static Routing Configuration 8-6
Configuration Examples for Static Routing 8-6
Additional References 8-6
Related Documents 8-7
Feature History for Static Routing 8-7
CHAPTER 9 Configuring Layer 3 Virtualization 9-1
Layer 3 Virtualization 9-1
Overview of Layer 3 Virtualization 9-1
VRF and Routing 9-2
VRF-Lite 9-2
VRF-Aware Services 9-3
Reachability 9-3
Filtering 9-4
Combining Reachability and Filtering 9-4
Licensing Requirements for VRFs 9-5
Guidelines and Limitations 9-5
Default Settings 9-6