Cisco Nexus 3000 series - Additional References; Related Documents; Feature History for Unicast RIB and FIB; Verifying the Unicast RIB and FIB Configuration

Send document comments to nexus3k-docfeedback@cisco.com
10-10
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Chapter 10 Managing the Unicast RIB and FIB
Verifying the Unicast RIB and FIB Configuration
Verifying the Unicast RIB and FIB Configuration
To display the unicast RIB and FIB configuration information, perform one of the following tasks:
Additional References
For additional information related to managing unicast RIB and FIB, see the following sections:
• Related Documents, page 10-10
• Feature History for Unicast RIB and FIB, page 10-10
Related Documents
Feature History for Unicast RIB and FIB
Table 10-1 lists the release history for this feature.
Command Purpose
show forwarding adjacency Displays the adjacency table on a module.
show forwarding distribution {clients |
fib-state}
Displays the FIB distribution information.
show forwarding interfaces module slot Displays the FIB information for a module.
show forwarding ipv4 route Displays routes in the FIB.
show hardware forwarding
dynamic-allocation status
Displays information about the TCAM allocation.
show ip adjacency Displays the adjacency table.
show ip route Displays IPv4 routes from the unicast RIB.
show routing Displays routes from the unicast RIB.
Related Topic Document Title
Unicast RIB and FIB CLI commands Cisco Nexus 3000 Series Command Reference,
Table 10-1 Feature History for Unicast RIB and FIB
Feature Name Releases Feature Information
Unicast RIB and FIB 5.0(3)U1(1) This feature was introduced.