Cisco Nexus 3000 series - Configuration Examples for EIGRP; Related Topics

Send document comments to nexus3k-docfeedback@cisco.com
4-28
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Chapter 4 Configuring EIGRP
Configuration Examples for EIGRP
Configuration Examples for EIGRP
This example shows how to configure EIGRP:
feature eigrp
interface ethernet 1/2
no switchport
ip address 192.0.2.55/24
ip router eigrp Test1
no shutdown
router eigrp Test1
router-id 192.0.2.1
Related Topics
See Chapter 11, “Configuring Route Policy Manager” for more information on route maps.
Additional References
For additional information related to implementing EIGRP, see the following sections:
• Related Documents, page 4-29
• MIBs, page 4-29