Cisco Nexus 3000 series - Starting the Switch; Powering Up and LED Verification

Send document comments to nexus3k-docfeedback@cisco.com
Contents
xiv
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Route Maps 11-2
Match Criteria 11-3
Set Changes 11-3
Access Lists 11-3
AS Numbers for BGP 11-3
AS-path Lists for BGP 11-4
Community Lists for BGP 11-4
Extended Community Lists for BGP 11-4
Route Redistribution and Route Maps 11-5
Licensing Requirements for Route Policy Manager 11-5
Guidelines and Limitations 11-5
Default Settings 11-5
Configuring Route Policy Manager 11-6
Configuring IP Prefix Lists 11-6
Configuring MAC Lists 11-7
Configuring AS-path Lists 11-8
Configuring Community Lists 11-9
Configuring Extended Community Lists 11-11
Configuring Route Maps 11-12
Verifying the Route Policy Manager Configuration 11-17
Configuration Examples for Route Policy Manager 11-17
Related Topics 11-18
Additional References 11-18
Related Documents 11-18
Standards 11-18
Feature History for Route Policy Manager 11-18
First-Hop Redundancy Protocols
CHAPTER 12 Configuring HSRP 12-1
Information About HSRP 12-1
HSRP Overview 12-2
HSRP for IPv4 12-3
HSRP Versions 12-4
HSRP Authentication 12-4
HSRP Messages 12-4
HSRP Load Sharing 12-4
Object Tracking and HSRP 12-5