Cisco Nexus 3000 series - Page 151

Send document comments to nexus3k-docfeedback@cisco.com
5-19
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release5.0(3)U1(1)
Chapter 5 Configuring Basic BGP
Configuring Basic BGP
clear bgp ip {unicast | multicast} {neighbor | *
| as-number | peer-template name | prefix} [vrf
vrf-name]
Clears one or more neighbors from the selected
address family. * clears all neighbors in the
address family. The arguments are as follows:
• neighbor—IPv4 address of a neighbor.
• as-number— Autonomous system number.
The AS number can be a 16-bit integer or a
32-bit integer in the form of higher 16-bit
decimal number and a lower 16-bit decimal
number in xx.xx format.
• name—Peer template name. The name can be
any case-sensitive, alphanumeric string up to
64 characters.
• prefix—IPv4 prefix. All neighbors within that
prefix are cleared.
• vrf-name—VRF name. All neighbors in that
VRF are cleared. The name can be any
case-sensitive, alphanumeric string up to 64
characters.
clear ip bgp {ip {unicast | multicast}}
{neighbor | * | as-number | peer-template name |
prefix} [vrf vrf-name]
Clears one or more neighbors. * clears all
neighbors in the address family. The arguments
are as follows:
• neighbor—IPv4 address of a neighbor.
• as-number— Autonomous system number.
The AS number can be a 16-bit integer or a
32-bit integer in the form of higher 16-bit
decimal number and a lower 16-bit decimal
number in xx.xx format.
• name—Peer template name. The name can be
any case-sensitive, alphanumeric string up to
64 characters.
• prefix—IPv4 prefix. All neighbors within that
prefix are cleared.
• vrf-name—VRF name. All neighbors in that
VRF are cleared. The name can be any
case-sensitive, alphanumeric string up to 64
characters.
clear ip bgp dampening [ip-neighbor | ip-prefix]
[vrf vrf-name]
Clears route flap dampening in one or more
networks. The arguments are as follows:
• ip-neighbor—IPv4 address of a neighbor.
• ip-prefix—IPv4. All neighbors within that
prefix are cleared.
• vrf-name—VRF name. All neighbors in that
VRF are cleared. The name can be any
case-sensitive, alphanumeric string up to 64
characters.
Command Purpose