Cisco Nexus 3000 series - Page 334

Send document comments to nexus3k-docfeedback@cisco.com
Index
IN-6
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release5.0(3)U1(1)
adjacency 3-1, 3-3
area border router 3-4
areas 3-1, 3-4
AS border router 3-5
authentication 3-7
backup designated router 3-3
configuring area authentication 3-19
configuring a totally stubby area 3-25
configuring authentication 3-18
configuring authentication on an interface 3-20
configuring DR priority 3-18
configuring ECMP 3-16
configuring filter lists 3-23
configuring load balancing 3-16
configuring MD5 authentication 3-20
configuring networks 3-16
configuring NSSA 3-26
configuring on an interface 3-16
configuring optional parameters on an interface 3-18
configuring redistribution 3-30
configuring route summarization 3-34
configuring simple password authentication 3-20
configuring stub areas 3-24
configuring stub route advertisements 3-35
configuring the hello interval 3-18
configuring virtual links 3-28
creating an instance 3-14
dead interval 3-2
default settings 3-12
delete an instance 3-15
description 3-1 to ??
designated router 3-3
disable the feature 3-14
displaying statistics 3-42
enable the feature 3-13
example configuration 3-42
feature history (table) 3-43
guidelines 3-12
hello interval 3-2
hello packet 3-2
licensing requirements 3-11
limitations 3-12
link cost 3-6
link-state database 3-7
LSA 3-1
LSA flooding 3-6
LSA pacing 3-6
LSAs 3-5 to 3-7
LSA types (table) 3-6
MIBs 3-43, 12-17
modifying default timers 3-36
multiple instances 3-11
neighbors 3-2
not-so-stubby area 3-9
NSSA 3-9
opaque LSAs 3-7
prerequisites 3-12
redistributed routes 3-32
restarting an instance 3-39
route redistribution
description
3-10
route summarization
description
3-10
shutting down an instance 3-18
SPF optimization 3-11
stub area 3-8
stub area (figure) 3-9
stub router advertisements
description
3-11
unicast RIB 3-7
verifying configuration 3-41
virtualization support 3-11
virtual link 3-9
virtual link (figure) 3-10
OSPFv2. See OSPF