Cisco Nexus 3000 series - Unpacking and Inspecting the Chassis

Send document comments to nexus3k-docfeedback@cisco.com
Contents
vi
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Opaque LSAs 3-7
OSPFv2 and the Unicast RIB 3-7
Authentication 3-7
Simple Password Authentication 3-8
MD5 Authentication 3-8
Advanced Features 3-8
Stub Area 3-8
Not-So-Stubby Area 3-9
Virtual Links 3-9
Route Redistribution 3-10
Route Summarization 3-10
OSPFv2 Stub Router Advertisements 3-11
Multiple OSPFv2 Instances 3-11
SPF Optimization 3-11
Virtualization Support 3-11
Licensing Requirements for OSPFv2 3-11
Prerequisites for OSPFv2 3-12
Guidelines and Limitations 3-12
Default Settings 3-12
Configuring Basic OSPFv2 3-13
Enabling the OSPFv2 Feature 3-13
Creating an OSPFv2 Instance 3-14
Configuring Optional Parameters on an OSPFv2 Instance 3-15
Configuring Networks in OSPFv2 3-16
Configuring Authentication for an Area 3-18
Configuring Authentication for an Interface 3-20
Configuring Advanced OSPFv2 3-22
Configuring Filter Lists for Border Routers 3-23
Configuring Stub Areas 3-24
Configuring a Totally Stubby Area 3-25
Configuring NSSA 3-26
Configuring Virtual Links 3-28
Configuring Redistribution 3-30
Limiting the Number of Redistributed Routes 3-32
Configuring Route Summarization 3-34
Configuring Stub Route Advertisements 3-35
Modifying the Default Timers 3-36
Restarting an OSPFv2 Instance 3-39
Configuring OSPFv2 with Virtualization 3-39