Cisco Nexus 3000 series - Page 8

Send document comments to nexus3k-docfeedback@cisco.com
Contents
viii
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Configuring Advanced EIGRP 4-13
Configuring Authentication in EIGRP 4-14
Configuring EIGRP Stub Routing 4-16
Configuring a Summary Address for EIGRP 4-17
Redistributing Routes into EIGRP 4-17
Limiting the Number of Redistributed Routes 4-19
Configuring Load Balancing in EIGRP 4-21
Adjusting the Interval Between Hello Packets and the Hold Time 4-22
Disabling Split Horizon 4-23
Tuning EIGRP 4-23
Configuring Virtualization for EIGRP 4-25
Verifying the EIGRP Configuration 4-27
Displaying EIGRP Statistics 4-27
Configuration Examples for EIGRP 4-28
Related Topics 4-28
Additional References 4-28
Related Documents 4-29
MIBs 4-29
Feature History for EIGRP 4-29
CHAPTER 5 Configuring Basic BGP 5-1
Information About Basic BGP 5-1
BGP Autonomous Systems 5-2
4-Byte AS Number Support 5-2
Administrative Distance 5-2
BGP Peers 5-3
BGP Sessions 5-3
Dynamic AS Numbers for Prefix Peers 5-3
BGP Router Identifier 5-4
BGP Path Selection 5-4
Step 1—Comparing Pairs of Paths 5-4
Step 2—Determining the Order of Comparisons 5-6
Step 3—Determining the Best-Path Change Suppression 5-6
BGP and the Unicast RIB 5-7
BGP Virtualization 5-7
Licensing Requirements for Basic BGP 5-7
Prerequisites for BGP 5-7
Guidelines and Limitations for BGP 5-8