Planning How to Position the Chassis in the Rack 13
Installing the Chassis in a Four-Post Rack 13
Installing the Switch using the N9K-C9300-RMK Rack-mount Kit 14
Attaching the Bottom-Support Rails to the Rack 14
Attaching Front-Mount Brackets to the Chassis 16
Installing the Chassis in a Four-Post Rack 17
Grounding the Chassis 18
Starting the Switch 19
Connecting the Switch to the ACI Fabric 23
CHAPTER 4
ACI Fabric Topology 23
Preparing to Connect to Other Devices 24
Connecting Leaf Switches to APICs 25
Connecting Leaf Switches to Spine Switches 26
Installing a Gigabit Ethernet module (GEM) 28
Virtual Port Channel Migration - Migration of Nodes from a First-Generation Switch to a
Second-Generation Switch 28
Setting Up an Optional Console Interface 29
Setting Up an Optional Management Connection 30
Optic Transceiver Removal Using the Optics Extraction Tool 30
Maintaining Transceivers and Optical Cables 31
Replacing Components 33
CHAPTER 5
Replacing a Power Supply Module 33
Removing an AC Power Supply 33
Removing an HVAC/HVDC Power Supply 34
Removing a DC Power Supply 34
Installing an AC Power Supply 35
Installing an HVAC/HVDC Power Supply 36
Installing a DC Power Supply 37
Wiring a 48 V DC Electrical Connector Block 37
Rack Specifications 41
APPENDIX A
Overview of Racks 41
Cisco Nexus 9364C-GX ACI-Mode Switch Hardware Installation Guide
iv
Contents
To Next Page
Loading...
Need help?
General