Fan3(sys_fan3) N9K-C9400-FAN-PI -- front-to-back Ok
Fan4(sys_fan4) N9K-C9400-FAN-PI -- front-to-back Ok
Fan5(sys_fan5) N9K-C9400-FAN-PI -- front-to-back Ok
Fan_in_PS1 -- -- front-to-back Ok
Fan_in_PS2 -- -- front-to-back Ok
Fan_in_PS3 -- -- front-to-back Ok
Fan_in_PS4 -- -- front-to-back Ok
Fan Zone Speed: Zone 1: 0x72
Fan Air Filter : NotSupported
Power Supply:
Voltage: 12 Volts
Power Actual Actual Total
Supply Model Output Input Capacity Status
(Watts ) (Watts ) (Watts )
------- ---------- --------------- ------ ---------- --------------------
1 NXA-PAC-2KW-PI 507 W 552 W 2000 W Ok
2 NXA-PAC-2KW-PI 555 W 603 W 2000 W Ok
3 NXA-PAC-2KW-PI 506 W 552 W 2000 W Ok
4 NXA-PAC-2KW-PI 507 W 552 W 2000 W Ok
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured) PS-Redundant
Power Supply redundancy mode (operational) PS-Redundant
Total Power Capacity (based on configured mode) 6000.00 W
Total Grid-A (first half of PS slots) Power Capacity 4000.00 W
Total Grid-B (second half of PS slots) Power Capacity 4000.00 W
Total Power of all Inputs (cumulative) 8000.00 W
Total Power Output (actual draw) 2075.00 W
Total Power Input (actual draw) 2259.00 W
Total Power Allocated (budget) N/A
Total Power Available for additional modules N/A
Temperature:
--------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
--------------------------------------------------------------------
1 FRONT 55 35 35 Ok
1 BACK 80 70 36 Ok
1 CPU 90 80 55 Ok
1 Quadpeaks 125 100 81 Ok
ASW4_QP_LEM#
Displaying Environment Temperature for the Switch
You can display information about the environment, for the switch by using the show environment
temperature command.
ASW4_QP_LEM# show environment temperature
show environment temperature
Temperature:
--------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
--------------------------------------------------------------------
Cisco Nexus 9408 NX-OS Mode Switch Hardware Installation Guide
48
Managing the Switch
Displaying Environment Temperature for the Switch