Chapter 1 Overview
Safety Recommendations
1-12
Cisco Redundant Power System Hardware Installation Guide
OL-3654-01
• Wear safety glasses when working under conditions that might be hazardous
to your eyes.
• Do not perform any action that creates a hazard to people or makes the
equipment unsafe.
Safety Warnings
Safety warnings appear throughout this guide in procedures that, if performed
incorrectly, might harm you. A warning symbol precedes each warning statement.
(For information on safety warnings and translations, see the “Notes, Cautions,
and Warnings” section on page xi.)
Safety with Electricity
Warning
Read the installation instructions before you connect the system to its power
source. To see translations of the warnings that appear in this publication, refer
to the Regulatory Compliance and Safety Information document that
accompanied this device.
Warning
The device is designed to work with TN power systems. To see translations of
the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information document that accompanied this device.
Warning
Before working on equipment that is connected to power lines, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals. To see translations of the warnings that appear in this
publication, refer to the Regulatory Compliance and Safety Information
document that accompanied this device.
To Next Page
Loading...
General