Cisco Power system User Manual

2-5
Cisco Redundant Power System Hardware Installation Guide
OL-3654-01
Chapter 2 Installing the Cisco RPS
Rack-Mounting the Cisco RPS
Tools and Equipment Required
You need the following tools and equipment to rack-mount the Cisco RPS:
• Number 2 Phillips screwdriver (not included)
• Screws for attaching the Cisco RPS to the rack (not included)
• Rack-mount brackets (see Figure 2-1 and Figure 2-2):
– One set of 19-inch brackets (ACS-3640RM-19=) ships with the
Cisco RPS.
– Order 23- or 24-inch brackets (ACS-3640RM-24=), as needed.
– Order telco brackets (AS52/3RM-TELCO-19=), as needed.
Identifying Rack-Mount Brackets
Figure 2-1 shows the 19-, 23-, and 24-inch brackets; Figure 2-2 shows the telco
bracket.
Figure 2-1 19-, 23-, and 24-Inch Rack-Mount Brackets
H9695
Bracket for 23- and 24-inch rack
Use with 23-inch rack
Bracket for 19-inch rack
Use with 24-inch rack

Cisco Power system Specifications

General

Brand	Cisco
Model	Power system
Category	Amplifier
Language	English