Cisco RV 120W Administration Guide

Introduction
Getting to Know the Cisco RV 120W
Cisco RV 120W Administration Guide 4
1
Back Panel
RESET Button—The Reset button has two functions:
• If the Cisco RV 120W is having problems connecting to the Internet, press
the RESET button for less than five seconds with a paper clip or a pencil tip.
This is similar to pressing the reset button on your PC to reboot it.
• If you are experiencing extreme problems with the Cisco RV 120W and
have tried all other troubleshooting measures, press and hold in the RESET
button for 10 seconds. This will restore the factory defaults and clear all of
the Cisco RV 120W settings.
LAN Ports (1-4)—These ports provide a LAN connection to network devices,
such as PCs, print servers, or additional switches.
WAN Por t—The WAN port is connected to your Internet device, such as a cable or
DSL modem.
ON/OFF Power Switch—Press this button to turn the Cisco RV 120W on and off.
When the button is pushed in, power is on.
Power Port—The power port is where you connect the AC power cable.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English