Cisco RV 120W Administration Guide

Configuring Quality of Service (QoS)
Configuring Traffic Metering
Cisco RV 120W Administration Guide 123
6
STEP 5 In the Increase This Month's Limit By field, if the monthly traffic limit has been
reached and you need to temporarily increase the limit, check this option and
enter the value by which you want to increase the limit.
NOTE The This Month's Limit field displays the data transfer limit applicable for this
month, which is the sum of the value in the Monthly Limit field and the
Increase this Month's Limit field.
STEP 6 In the Traffic Counter fields, specify the type of action to be taken on the traffic
counter:
• Restart Counter Now—Select this option and click Save to reset the
counter to zero immediately.
• Restart Traffic Counter at Specific Time—Set a schedule for the traffic
counter to restart. Typically, this is the last day of the month. Set the
appropriate time and day of the month.
• Send E-mail Report before restarting counter—Select this option to receive
an e-mail report before the traffic counter is restarted. The e-mail will be
sent to the address configured in the Logging section.
NOTE This feature works only if you enable e-mail logs on the Administration >
Logging > Remote Logging page. See Configuring Logging, page 131.
STEP 7 The When Limit is Reached section defines the router actions upon the traffic
counter limits being reached at any given time. In the Traffic Block Status list,
choose one of the following:
• Send e-mail alert—Check this option to send an e-mail when traffic limit is
reached.
• Block All Traffic—If selected, then when the traffic limit is reached, all traffic
to and from the WAN will be blocked.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English