Cisco RV134W Administration Guide

Wireless Networks
Basic Wireless Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 75
4
Editing Wireless Network Settings
The Wireless Table on the Basic Settings page lists the settings of the four
wireless networks supported on the device.
To configure wireless network settings:
STEP 1 Check the box for the networks that you want to configure.
STEP 2 Click Edit.
STEP 3 Configure the following settings:
STEP 4 Click Save.
Enable SSID Click On to enable the network.
SSID Name Enter the name of the network.
SSID Broadcast Check this box to enable SSID broadcast. If
SSID broadcast is enabled, the wireless router
advertises its availability to wireless-equipped
devices in the range of the router.
Security Mode See Configuring the Security Mode.
MAC Filter See Configuring MAC Filtering.
VLAN Select the VLAN associated with the network.
Wireless Isolation with SSID Check this box to enable wireless isolation
within the SSID.
WMM (Wi-Fi Multimedia) Check this box to enable WMM.
WPS Check this box to map the device WPS button
on the front panel to this network.

Cisco RV134W Specifications

General

Brand	Cisco
Model	RV134W
Category	Wireless Router
Language	English