Cisco RV180 Administration Guide

Configuring VPN and Security
Configuring Advanced VPN Parameters
Cisco RV180/RV180W Administration Guide 114
5
• DER ASN1 DN
If you chose FQDN, User-FQDN, or DER ASN1 DN as the identifier type—
Enter the IP address or domain name in the Identifier field.
STEP 4 In the IKE SA Parameters section, enter these settings:
The Security Association (SA) parameters define the strength and mode for
negotiating the SA.
• Encryption Algorithm—Choose the algorithm used to negotiate the SA:
- DES
- 3DES
- AES-128
- AES-192
- AES-256
• Authentication Algorithm—Specify the authentication algorithm for the
VPN header:
- MD5
- SHA-1
- SHA2-256
- SHA2-384
- SHA2-512
Ensure that the authentication algorithm is configured identically on both
sides.
• Authentication Method—Choose one of the following options:
- Pre-Shared Key—Choose this option for a simple password-based key
that is shared with the IKE peer. Then enter the key in the space provided.
Note that the double-quote character (“) is not supported in the pre-
shared key.
- RSA-Signature—Choose this option to disable the pre-shared key text
field and use the Active Self Certificate that was uploaded on the
Security > SSL Certificate page. A certificate must be configured in
order for RSA-Signature to work.

Cisco RV180 Specifications

General

WAN Ports	1
LAN Ports	4
VPN Support	Yes
Wireless Support	No
Firewall	Yes
Device Type	VPN Router
VPN Tunnels	10
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Encryption	3DES, AES
VPN Protocols	IPSec
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70 °C
Humidity	10% to 85% non-condensing
Dimensions	130 x 130 x 35 mm
Weight	0.28 kg