Viewing the Cisco RV180/RV180W Status
Viewing the Dashboard
Cisco RV180/RV180W Administration Guide 160
8
The view of the back panel shows you which ports are used (colored in green) and
allows you to click the port to obtain information about the connection.
• To view a port’s connection information, click the port.
• To refresh the port information, click Refresh.
• To close the port information sheet, click Close.
The Dashboard page displays the following:
Device Information
Resource Utilization
Host Name The name of the device. To change the name, click
Edit.
See Configuring IPv4 LAN (Local Network)
Settings, page 32.
Firmware Version The current software version the device is running.
By default, the router boots from this version.
Serial Number The serial number of the device.
Users Displays the number of users configured on the
device and the number of active users. For
example, “1/2” means that there is one active user
logged on and a total of two configured users.
CPU CPU utilization by the router.
Memory Memory utilization by the router.
Current Time Time of day.
System Up Time How long the system has been running.
To Next Page
Loading...
Need help?
General
