Cisco RV180 Administration Guide

Introduction
Connecting the Equipment
Cisco RV180/RV180W Administration Guide 13
1
STEP 5 Connect the power adapter to the Cisco RV180/RV180W power port (12VDC).
!
CAUTION Use only the power adapter that is supplied with the device. Using a different
power adapter could damage the device.
STEP 6 Plug the other end of the adapter into an electrical outlet. You may need to use a
specific plug (supplied) for your country.
STEP 7 On the Cisco RV180/RV180W, push in the ON/OFF power button.
The power light on the front panel lights up green when the power adapter is
connected properly and the unit is turned on.

Cisco RV180 Specifications

General

WAN Ports	1
LAN Ports	4
VPN Support	Yes
Wireless Support	No
Firewall	Yes
Device Type	VPN Router
VPN Tunnels	10
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Encryption	3DES, AES
VPN Protocols	IPSec
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70 °C
Humidity	10% to 85% non-condensing
Dimensions	130 x 130 x 35 mm
Weight	0.28 kg