Cisco SCE8000

4-6
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
OL-16478-03
Chapter 4 Installing the Cisco SCE8000 Chassis
Preparing for Installation
The following table lists the AC-input power cord options, specifications, and Cisco product numbers
for the 2700 W AC-input power supplies. It also references power cord illustrations.
*The PDU power cable is designed for users who power their switch from a PDU. The end of the cable
that plugs into the Cisco SCE8000 chassis has a C19 connector; the other end of the cable that plugs into
the PDU has a C20 connector.
Table 4-4 AC-Input Power Cord Options
Locale Part Number Length Plug Rating
Power Cord
Reference
Illustration
North America
(locking)
CAB-GSR16-US(
=)
14 feet (4.3m) 250VAC, 20A Figure 4-1
Europe CAB-GSR16-EU(
=)
14 feet (4.3m) 250VAC, 16A Figure 4-1
International CAB-AC16A-90L
-IN(=)
14 feet (4.3m) 250VAC, 16A Figure 4-1
China CAB-AC16A-CH
=
14 feet (4.3 m) 250VAC, 16A Figure 4-2
Continental
Europe
CAB-AC-2500W-
EU=
14 feet (4.3 m) 250VAC, 16A Figure 4-3
International CAB-AC-2500W-I
NT=
14 feet (4.3 m) 250VAC, 16A Figure 4-4
Israel CAB-AC-2500W-I
SRL=
14 feet (4.3 m) 250VAC, 16A Figure 4-5
Japan, North
America
(nonlocking plug)
200–240VAC
operation
CAB-AC-2500W-
US1=
14 feet (4.3 m) 250VAC, 16A Figure 4-6
Japan, North
America (locking
plug)
200–240VAC
operation
CAB-AC-C6K-T
WLK=
14 feet (4.3 m) 250VAC, 16A Figure 4-7
Japan, North
America
100–120VAC
operation1
CAB-7513AC= 14 feet (4.3 m) 125VAC, 20A Figure 4-8
South Africa CAB-7513ACSA= 14 feet (4.3 m) 250VAC, 16A Figure 4-9
Switzerland CAB-ACS-16= 14 feet (4.3 m) 250VAC, 16A Figure 4-10
Australia, New
Zealand
CAB-AC-16A-AU
S=
14 feet (4.3 m) 250VAC, 16A Figure 4-11
Power Distribution
Unit (PDU(=)*
CAB-C19-CBN 14 feet (4.3 m) 250VAC, 16A Figure 4-12