Cisco SCE8000 Installation And Configuration Guide

5-3
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
OL-16478-03
Chapter 5 Connecting the Management Interfaces
Initial Setup Parameters
• Passwords for user, admin and root level access. These are authorization-level passwords, not
individual passwords. These passwords may be encrypted.
Passwords must meet the following criteria:
– Minimum length — 4 characters
– Maximum length — 100 characters
– Begin with an alpha character
– May contain only printable characters
• The default password for all levels is cisco.
• System clock— Current date and time. The clock and the calendar must always be synchronized.
• Time zone—The name or ID of the time zone along with the number of hours offset from UTC.
• Domain name server—Default domain name, which is used to complete unqualified host names, as
well as up to three domain name servers, which are used for DNS lookup.
You must also enable DNS lookup.
• RDR formatter destination—The SCE platform generates Raw Data Records and sends them to the
specified destinations (external collection systems) via the RDR formatter. You can configure up to
eight RDR formatter destinations. Specify the IP address and port number for each destination.
The following table lists commands both for displaying the currently configured values and for
configuring these parameters. It also lists the command mode for each configuration command. All show
commands are executed from the User Exec command mode.
.
Figure 5-2 Initial Setup Configuration
Parameter show command configuration command
configuration command
mode
Management IP address
and subnet mask
show interface GigabitEthernet
1/1 ip address
ip address x.x.x.x subnet-mask GigabitEthernet
Interface Configuration
Default gateway show ip default-gateway ip default-gateway x.x.x.x Global Configuration
Hostname show hostname hostname host-name Global Configuration
Authorization level
passwords
N/A enable password level level
[encryption-type] password
Global Configuration
Clock show clock
show calendar
calendar set hh:mm:ss day month
year
clock read-calendar
OR
clock set hh:mm:ss day month year
clock update-calendar
Privileged EXEC
Time zone show timezone clock timezone zone-name
offset-hours
Global Configuration

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English