Contents
viii
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
OL-16478-03
Required Tools 9-11
Removing the Fan Assembly 9-11
Installing the Fan Assembly 9-12
Removing and Replacing Modules 9-13
Required Tools 9-13
Handling SIPs 9-13
Installing a Module 9-14
Removing a Module 9-18
Inserting and Removing a Module: Detail 9-20
Verifying the Installation 9-21
Removing and Replacing Shared Port Adapters 9-23
Required Tools and Equipment 9-23
Laser/LED Safety 9-23
Handling SPAs 9-24
SPA Installation and Removal 9-25
Installing a SPA in a SIP 9-25
Removing a SPA from a SIP 9-26
Removing and Replacing the Optical Bypass Module 9-26
Removing the Optical Bypass Module 9-26
Installing the Optical Bypass Module 9-26
Replacing the Optical Bypass Module without Disrupting Traffic on the Link 9-27
CHAPTER
A Using Optical Splitters with 10GBE Links A-1
Supported Configurations A-1
Unsupported Configuration A-2
To Next Page
Loading...
Need help?
General
