Cisco SCE8000 Installation And Configuration Guide

6-6
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
OL-16478-03
Chapter 6 Cabling the Line Ports and Completing the Installation
Connecting the Line Ports to the Network
The traffic ports would be assigned to the links as follows:
• Link 1. S=0/1, N=2/2
• Link 2. S=0/2, N=2/4
• Link 3. S=0/3, N=3/1
• Link 4. S=1/3, N=3/2
The standby ports would be assigned to the links as follows:
• Link 5 (standby). S=1/5, N=3/4
• Link 6 (standby). S= 2/3, N=4/4
If Cisco SCE8000 #3 is the redundant platform, Links 5 &6 would be connected to it and the actual
connections might look like this:
• S=0/1, Cisco SCE8000 #1 3/0/0
• N=2/2, Cisco SCE8000 #1 3/1/0
• S=0/2, Cisco SCE8000 #1 3/2/0
• N=2/4, Cisco SCE8000 #1 3/3/0
• S=0/3, Cisco SCE8000 #2 3/0/0
• N=3/1, Cisco SCE8000 #2 3/1/0
• S=1/3, Cisco SCE8000 #2 3/2/0
• N=3/2, Cisco SCE8000 #2 3/3/0
• S=1/5, Cisco SCE8000 #3 3/0/0
• N=3/4, Cisco SCE8000 #3 3/1/0
• S=2/3, Cisco SCE8000 #3 3/2/0
• N=4/4, Cisco SCE8000 #3 3/3/0
Dual Routers MGSCP Connectivity
Four links on each router would require four Cisco SCE8000 platforms. For the sake of simplicity, we
assume that the EC ports are the same on both routers.
Connect the ordered pairs, each pair of EC ports to a pair of Subscriber/Network ports in a Cisco
SCE8000 platform:
• Cisco SCE8000 #1: Link 1 on both routers
• Cisco SCE8000 #2: Link 2 on both routers
• Cisco SCE8000 #3: Link 3 on both routers
• Cisco SCE8000 #4: Link 4 on both routers
The actual connections might look like this:
• Router 1: S=0/1, Cisco SCE8000 #1 3/0/0
• Router 2: S=0/1, Cisco SCE8000 #1 3/2/0
• Router 1: N=2/2, Cisco SCE8000 #1 3/1/0
• Router 2: N=2/2, Cisco SCE8000 #1 3/3/0
• Router 1: S=0/2, Cisco SCE8000 #2 3/0/0
• Router 2: S=0/2, Cisco SCE8000 #2 3/2/0

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English