Cisco Secure Firewall 3100 User Manual

Figure 27: Subinterface Settings
a)
Step 5 Click Save and then Save in the top right of the Interfaces page.
You can now Deploy the policy to the chassis. The changes are not active until you deploy them.
Add an Instance
You can add one or more instances to a chassis in multi-instance mode. The number of supported instances
depends on your model; see Requirements and Prerequisites for Instances, on page 14.
Before you begin
Enable Multi-Instance Mode, on page 18 and Add a Multi-Instance Chassis to the Management Center, on
page 20.
Procedure
Step 1 From Devices > Device Management, click Manage in the Chassis column or click Edit ( ).
Figure 28: Manage Chassis
The Chassis Manager page opens for the chassis to the Summary page.
Step 2 Click Instances, and click Add Instance.
Multi-Instance Mode for the Secure Firewall 3100
32
Multi-Instance Mode for the Secure Firewall 3100
Add an Instance

Cisco Secure Firewall 3100 Specifications

General

Brand	Cisco
Model	Secure Firewall 3100
Category	Server
Language	English