Cisco Secure Firewall 3100 User Manual

Figure 57: Time Zones
Step 3 Choose your Time Zone from the drop-down menu.
Step 4 Click Save to save all policy changes.
Manage Multi-Instance Mode
This section describes less common tasks, including changing settings at the FXOS CLI or changing interfaces
assigned to the chassis.
Change Interfaces Assigned to an Instance
You can allocate or unallocate an interface on the instance. Adding a new interface, or deleting an unused
interface, has minimal impact on the instance configuration. You can also edit the membership of an allocated
EtherChannel without affecting the instance. However, deleting an interface that is used in your security policy
will impact the configuration.
Interfaces can be referenced directly in many places in the instance configuration, including access rules,
NAT, SSL, identity rules, VPN, DHCP server, and so on. Deleting an interface will delete any configuration
associated with that interface.
Policies that refer to security zones are not affected.
For high availability, you need to make the same interface changes for the other unit. Otherwise, high availability
might not operate correctly.
Note
Multi-Instance Mode for the Secure Firewall 3100
57
Multi-Instance Mode for the Secure Firewall 3100
Manage Multi-Instance Mode

Cisco Secure Firewall 3100 Specifications

General

Brand	Cisco
Model	Secure Firewall 3100
Category	Server
Language	English