Cisco Secure Firewall 3100 User Manual

Figure 44: Add DNS Server Group
Step 5 Either select an existing DNS server group (see Creating DNS Server Group Objects), or click New Group.
If you add a new group, you see the following dialog box. Provide a name and up to four DNS server IP
addresses as comma-separated values, and click Add.
Figure 45: New DNS Server Group Object
Step 6 Click Save to add the DNS server to the list.
Step 7 Repeat these steps to add additional server groups.
Make sure you only identify a maximum of four DNS servers in all groups combined.
Step 8 Click Save to save all policy changes.
Configure SSH and SSH Access List
To allow SSH sessions from the admin user to the chassis on the Management interface, enable the SSH server
and configure the allowed networks.
Multi-Instance Mode for the Secure Firewall 3100
44
Multi-Instance Mode for the Secure Firewall 3100
Configure SSH and SSH Access List

Cisco Secure Firewall 3100 Specifications

General

Brand	Cisco
Model	Secure Firewall 3100
Category	Server
Language	English