Cisco Secure Firewall 3100 - Configure Syslog

Figure 50: Network Objects
Step 11 Click Save to save all policy changes.
Configure Syslog
You can enable syslogs from the chassis. These syslogs come from the chassis' FXOS operating system.
Procedure
Step 1 Choose Devices > Platform Settings and create or edit the chassis policy.
Step 2 Choose Syslog.
Step 3 Click the Local Destinations tab, and complete the following fields.
Multi-Instance Mode for the Secure Firewall 3100
49
Multi-Instance Mode for the Secure Firewall 3100
Configure Syslog