Cisco Secure Firewall 3100 User Manual

Figure 35: Summary
You can edit any settings on this screen before saving the instance. After you save, the instance is added to
the Instances screen.
Step 8 On the Instances screen, click Save.
Step 9 Deploy the chassis configuration.
After deployment, the instance will be added as a device on the Device Management page.
Customize the System Configuration
You can configure chassis-level settings such as SNMP. You can also import or export the chassis FXOS
configuration.
Configure SNMP
You can access chassis-level MIBs through the data interface of one of the instances, which you specify in
the chassis system configuration. You can only use this instance for chassis SNMP information. You cannot
access SNMP through the chassis Management interface.
Multi-Instance Mode for the Secure Firewall 3100
38
Multi-Instance Mode for the Secure Firewall 3100
Customize the System Configuration

Cisco Secure Firewall 3100 Specifications

General

Brand	Cisco
Model	Secure Firewall 3100
Category	Server
Language	English