General Administrative Information and Operations
Rebooting the Switch
Cisco Small Business 300 Series Managed Switch Administration Guide 47
5
To reboot the switch:
STEP 1 Click Administration > Reboot. The Reboot Page
opens.
STEP 2 Click one of the Reboot buttons.
• Reboot—Reboots the switch. Since any unsaved information in the Running
Configuration s discarded when the switch is rebooted, you must click Save
in the upper-right corner of any window to preserve current configuration
across the boot process. (If the Save option is not displayed, the Running
Configuration matches the Startup Configuration and no action is
necessary.)
• Reboot to Factory Defaults—Reboots the switch by using factory default
configuration. This process erases the Startup Configuration file; any
settings that are not saved to another file are cleared when this action is
selected.
CAUTION DHCP Auto Configuration should be disabled (enabled by default), otherwise a
configuration file might be loaded from a TFTP server, instead of the factory default
settings.
The switch is rebooted.
To Next Page
Loading...
Need help?
General
