Cisco SF 302-08P User Manual

Configuring Discovery
Configuring LLDP
Cisco Small Business 300 Series Managed Switch Administration Guide 72
8
• Application—Select from the list the type of application (type of traffic) for
which the network policy is being defined:
- Voice
- Voice Signaling
- Guest Voice
- Guest Voice Signaling
- Softphone Voice
- Video Conferencing
- Streaming Video
- Video Signaling
• VLAN ID—Enter the VLAN ID to which the traffic should be sent.
• VLAN Tag—Select whether the traffic is Tagged or Untagged.
• User Priority—Select the traffic priority applied to traffic defined by this
network policy.
• DSCP Value—Select the DSCP value to associate with application data
sent by neighbors. This informs them how they should mark the application
traffic they send to the switch.
STEP 4 Click Apply. The network policy is defined. Associate the network policy with a
port by using the LLDP MED Port Settings Page.
Configuring LLDP MED Port Settings
The LLDP MED Port Settings Page enables selecting the network policies,
configured in the LLDP MED Network Policy Page, to be advertised on the port,
and selecting the LLDP-MED TLVs to be sent inside the LLDP PDU.
To configure LLDP MED on each port:
STEP 1 Click Administration > Discovery - LLDP > LLDP MED Port Settings. The LLDP
MED Port Settings Page opens.
This page displays LLDP MED settings, including enabled TLVs, for all ports.

Cisco SF 302-08P Specifications

General

Brand	Cisco
Model	SF 302-08P
Category	Switch
Language	English