Name: Cisco SG350-28
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Security: IPv6 First Hop Security

Configuring IPv6 First Hop Security through Web GUI

565 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

Policy Attachment (VLAN)

To attach a policy to one or more VLANs:

STEP 1 Click Security > IPv6 First Hop Security > Policy Attachment (VLAN).

The list of policies that are already attached are displayed along with their Policy Type, Policy

Name and VLAN List.

STEP 2 To attach a policy to a VLAN, click Add and enter the following fields:

• Policy Type—Select the policy type to attach to the interface.

• Policy Name—Select the name of the policy to attach to the interface

• VLAN List—Select the VLANs to which the policy is attached.

STEP 3 Click Apply to add the settings to the Running Configuration file.

Policy Attachment (Port)

To attach a policy to one or more ports or LAGs:

STEP 1 Click Security > IPv6 First Hop Security > Policy Attachment (Port).

The list of policies that are already attached are displayed along with their Interface number,

Policy Type, Policy Name and VLAN List.

STEP 2 To attach a policy to a port or LAG, click Add and enter the following fields:

• Interface—Select the interface on which the policy will be attached.

• Policy Type—Select the policy type to attach to the interface. IPv6 First Hop Security

Overview.

• Policy Name—Select the name of the policy to attach to the interface

• VLAN List—Select the VLANs to which the policy is attached.

STEP 3 Click Apply to add the settings to the Running Configuration file.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350-28 and is the answer not in the manual?

Cisco SG350-28 Specifications

General