6 Advanced Features
Bluetooth Support
Your phone is Bluetooth compatible and works with Bluetooth devices such as
headsets and mobile phones.
Enabling Bluetooth Devices
1.
Press Setup
2.
Select User Preferences
3.
Select Bluetooth Configuration
4.
With Bluetooth selected, press the Right Arrow key to turn Bluetooth
On
5.
Press Set
Connecting Bluetooth Headsets
1.
Enable Bluetooth as described above
2.
Press Setup
3.
Select User Preferences
4.
Select Bluetooth Configuration and press Select
5.
Scroll to Bluetooth Mode and press the Right Arrow key to choose
one of the f
ollowing:
a.
Phone – Your IP phone pairs with a Bluetooth headset only.
Choose this option if you will not use the Cisco IP phone wi
th
a Bluetooth-enabl
ed mobile phone.
b.
Handsfree - Your IP phone will operate as a handsfree
device with a Bluetooth-enabl
ed mobile phone.
c.
Both - Your Cisco IP phone uses a Bluetooth headset or
operates wit
h a Bluetooth-enabled mobile phone. Your IP
phone will connect to only one device at a time (either t
he
Bluetooth headset or the Bluetooth-enabl
ed mobile phone.
6.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter
the profile s
creen
7.
Press Scan to scan for your headset. Ensure the headset is powered
on and has Bluetooth activated.
8.
In the list of found devices, select your headset and press Select to
edit the profile
9.
Scroll to PIN and enter the PIN for your Bluetooth headset
10.
Scroll to Connect Automatically and press the Right Arrow key to
turn to On
11.
Press Connect
Connecting Mobile P
hones
1.
Enable Bluetooth as described above
2.
Press Setup
3.
Select User Preferences
4.
Select Bluetooth Configuration and press Select
5.
Scroll to Bluetooth Mode and press the Right Arrow key to choose
one of the f
ollowing:
40
To Next Page
Loading...
