Cisco SPA525G2 - Adding Contacts; Adding Contacts Manually; Adding Contacts from Call Lists

Adding Contacts
You can add contacts to your contact directory:
• Manually
• From a call list
Adding Contacts Manually
To add a contact to the local contact directory manually:
1. Press
2. Press the Option 1, Directory.
3. Select #1 Personal Address Book.
4. Press the Select soft key.
5. Press the Add soft key
6. Enter the first and last name of the contact.
Use the 1/A/a soft key to select between numeric and up- per/lower case
alphanumeric modes. Use * and
# to access special characters in other
languages.
7. Using the Arrow Pad scroll down and enter a contact number.
This is a required field and it must be unique (not already in the directory).
8. Once you are done press the save soft key.
Adding Contacts from Call Lists
To add a contact to the local contact directory from a call list:
1. Press the
2. Press or select # 2, Call History using the select soft key check key.
3. Choose from All Calls, Missed Calls, Received Calls, and Placed Calls.
4. Press the Option soft key.
4. Press the Add to Address Book.
5. Then press the Select soft key or Check button on arrow pad.
6. Enter in the Contact Info using the Arrow Pad and pressing the Save soft
key once completed all desired f
ields.
36