IMPORTANT SAFETY AND
CONFORMANCE INFORMATION FOR IP
PBX BASE UNIT AND DESKPHONES
Conformance
This equipment is designed for use in the United States.
This equipment complies with the following standards: FCC
Part 15, Subparts B, C, D
FCC Part 68
UL60950
Analog extension ports: TNV3 CO
port: TNV3
ADSL port: TNV3
Power fail port TNV3
LAN/WAN ports
SELV
Important Safety instructions
The following safety information is reprinted from IEC60950.
• When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury t
o
persons, includi
ng the following:
• Read and understand all instructions.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for c
leaning.
• Do not use this product near water (for example, in a wet basement).
• Do not place this product on an unstable cart, stand, or table. The
product can fall, causing serious damage to the p
roduct.
• Slots and openings in the cabinet and the back or bottom are provided for
ventilation, to protect it from overheating; these openings must not be
blocked or covered. This product should never be placed near or
ov
er a radiator or heat register. This product should not be placed in a
built-i
n installation unless proper ventilation is provided.
• This product should be operated only from the type of power source
indicated in the manual. If you are not sure of the type of power source t
o
your building, consult your dealer or local Power Company. The po
wer
socket outlet must
be located near the product and must be easily
accessible to allow pl
ugging/unplugging.
• Do not allow anything to rest on the power cord. Do not locate this
product where persons walking on it will abuse the c
ord.
• Do not use an extension cord with this product’s AC power cord. The AC
outlet for this product should not be used for any other el
ectrical
equipment.
54