Cisco Touch10 User Manual

30
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
Statuses
Command Reference
UserInterface Extensions Widget [n] WidgetId
UserInterface Extensions Widget [n] Value
This status returns the identier (WidgetId) and the current value
of the widgets.
The value is an empty string until a value is set by using the
UserInterface Extensions Widget SetValue command.
USAGE:
xStatus UserInterface Extensions
Value space of the result returned:
Value: The value of the widget. Depends on widget type. String
(0, 255).
WidgetId: The unique widget identier. String (0, 40).
Example:
xstatus UserInterface Extensions
*s UserInterface Extensions Widget 1 Value: “on”
*s UserInterface Extensions Widget 1 WidgetId: “togglebutton”
*s UserInterface Extensions Widget 2 Value: “255”
*s UserInterface Extensions Widget 2 WidgetId: “slider”
*s UserInterface Extensions Widget 3 Value: “Blinds”
*s UserInterface Extensions Widget 3 WidgetId: “spinner”
*s UserInterface Extensions Widget 4 Value: “inactive”
*s UserInterface Extensions Widget 4 WidgetId: “button”
*s UserInterface Extensions Widget 5 Value: “2”
*s UserInterface Extensions Widget 5 WidgetId: “groupbutton”
*s UserInterface Extensions Widget 6 Value: “Projector is
ready”
*s UserInterface Extensions Widget 6 WidgetId: “textfield”
** end

Cisco Touch10 Specifications

General

Display Size	10.1 inches
Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Connectivity	Ethernet, Wi-Fi
Power	Power over Ethernet (PoE)
Mounting	Tabletop or wall mount
Processor	ARM-based processor
Compatibility	Cisco video conferencing systems