Cisco Touch10 User Manual

29
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
Commands
Command Reference
UserInterface Extensions Widget SetValue
This command sets the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. If the
value is out of range, the command returns an error.
USAGE:
xCommand UserInterface Extensions Widget SetValue Value: Value
WidgetId: WidgetId
in which
Value : String (0, 255)
The value of the widget. The range of values depends on the
widget type.
WidgetId : String (0, 40)
The unique identier for the widget.
UserInterface Extensions Widget UnsetValue
This command empties the value of the given widget, and the
UserInterface Extensions statuses are updated accordingly. The
user interface is notied that the widget is no longer selected.
USAGE:
xCommand UserInterface Extensions Widget UnsetValue WidgetId:
WidgetId
in which
WidgetId : String (0, 40)
The unique identier for the widget.
UserInterface Extensions Clear
This command deletes all user interface extensions (widgets)
from the video system.
USAGE:
xCommand UserInterface Extensions Clear
UserInterface Extensions List
Use this command to list all user interface extensions (widgets)
that exist on the video system.
USAGE:
xCommand UserInterface Extensions List

Cisco Touch10 Specifications

General

Display Size	10.1 inches
Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Connectivity	Ethernet, Wi-Fi
Power	Power over Ethernet (PoE)
Mounting	Tabletop or wall mount
Processor	ARM-based processor
Compatibility	Cisco video conferencing systems