Cisco Touch10 User Manual

33
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
Command Details
Use of a Video Switch
UserInterface Presentation ExternalSource Add
This command establishes and denes an input source.
xcommand UserInterface Presentation ExternalSource Add
ConnectorId: ConnectorId Na m e: Name SourceIdentifier:
SourceIdentifier Ty p e: Type
in which:
ConnectorId : The ID of the codec connector to which the
external switch is connected
Name : Name displayed on touch 10
SourceIdentier : A unique string ID used to identify this source
when selecting or setting state
Type : Decides what icon is displayed on the Touch 10, choose
between: <pc/camera/desktop/document_camera/mediaplayer/
other/whiteboard>
Example:
xcommand UserInterface Presentation ExternalSource Add
ConnectorId: 3 Name: “Blu-ray”
SourceIdentifier: bluray Type: mediaplayer
UserInterface Presentation ExternalSource List
This command returns the current list of external sources.
xcommand UserInterface Presentation ExternalSource List
UserInterface Presentation ExternalSource
Remove
This command removes a source from the list.
xcommand UserInterface Presentation ExternalSource Remove
SourceIdentifier: SourceIdentifier
in which:
SourceIdentier is a unique string ID used to identify this
source when selecting or setting state.
UserInterface Presentation ExternalSource
RemoveAll
This command removes all sources from the list.
xcommand UserInterface Presentation ExternalSource RemoveAl
UserInterface Presentation ExternalSource
Select
Starts to present the selected source if it is in ready state and
has a valid ConnectorId. Also shows the item in sharetray as
“Presenting”.
xcommand UserInterface Presentation ExternalSource Select
SourceIdentifier: SourceIdentifier
in which:
SourceIdentier is a unique string ID used to identify this source
when selecting or setting state.
UserInterface Presentation ExternalSource State
Set
Used to change state of the source with SourceIdentier.
xcommand UserInterface Presentation ExternalSource State
Set SourceIdentifier: SourceIdentifier State: State
[ErrorReason: ErrorReason]
in which:
SourceIdentier : is a unique string ID used to identify this
source when selecting or setting state
State : <Error/Hidden/NotReady/Ready> Ready is the only
presentable state, hidden exists in the list but does not show in
the sharetray.
ErrorReason : Optional. Displays in the share tray if the state is set
to Error.

Cisco Touch10 Specifications

General

Display Size	10.1 inches
Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Connectivity	Ethernet, Wi-Fi
Power	Power over Ethernet (PoE)
Mounting	Tabletop or wall mount
Processor	ARM-based processor
Compatibility	Cisco video conferencing systems