Cisco Touch10 User Manual

40
D1535805 User Guide In-Room Control for Touch10. Produced June 2017 for CE9.0. © 2015–2017 Cisco Systems, Inc. All rights reserved
Granting Access to In-Room Control Editor and Extensions API
Who Has Access?
In order to access the In-room control editor you will need to
have administrator rights.
However, an administrator may create an In-room Control User
account. With this account it is possible to log into the codec to
run the In-room Control Editor. No other part of the web interface
is accessible from this account.
If you use SSH to log into the codec, only a very limited set of the
API will be accessible.

Cisco Touch10 Specifications

General

Display Size	10.1 inches
Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Connectivity	Ethernet, Wi-Fi
Power	Power over Ethernet (PoE)
Mounting	Tabletop or wall mount
Processor	ARM-based processor
Compatibility	Cisco video conferencing systems