7-34
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
cts role-based
In the following example, a Catalyst 6500 series includes VLAN 57, and 89 through 101 to VRF
l2ipv4. The VRF was created with the vrf global configuration command.
Cat6k(config)# cts role-based l2-vrf l2ipv4 vlan-list 57, 89-101
Related Commands Command Description
cts sxp Configures SXP on a network device.
cts sgt Configures local device security group tag.
show cts role-based sgt-map Displays role-based access control information
To Next Page
Loading...
