Cisco TrustSec - Page 134

7-48
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
clear cts macsec
clear cts macsec
To clear the MACsec counters for a specified interface, use the clear cts macsec counters command.
clear cts macsec counters interface type slot/port
Syntax Description
Command Modes Privileged EXEC
Supported User Roles Administrator
Command History
Examples The following example clears the counters on a gigabitEthernet interface on a Catalyst 6500 series
switch:
Router# clear cts macsec counters interface gigabitEthernet 6/2
Related Commands
interface type slot/port Specifes the interface.
Release Modification
12.2(50) SY This command was introduced on the Catalyst 6500 Series Switches.
Command Description
show cts macsec
show cts interface