Cisco TrustSec - Page 135

7-49
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
clear cts pac
clear cts pac
To clear TrustSec Protected Access Credential (PAC) information from the keystore,
use the clear cts pac command in privileged EXEC mode.
clear cts pac {A-ID hexstring | all}
Syntax Description
Defaults None
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History
Examples The following command clears all PACs in the keystore:
Router# clear cts pac all
Related Commands
A-ID hexstring Specifies the authenticator ID (A-ID) of the PAC to be removed from the
keystore.
all Specifies that all PACs on the device be deleted.
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
Command Description
show cts pacs Displays the A-ID and PAC-info for PACs in the keystore.
show cts keystore Displays the contents of the keystore.