7-61
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
match flow cts
Examples The following example configures an IPV4 Flow Record (5-tuple, direction, SGT, DGT):
router(config)# flow record cts-record-ipv4
router(config-flow-record)# match ipv4 protocol
router(config-flow-record)# match ipv4 source address
router(config-flow-record)# match ipv4 destination address
router(config-flow-record)# match transport source-port
router(config-flow-record)# match transport destination-port
router(config-flow-record)# match flow direction
router(config-flow-record)# match flow cts source group-tag
router(config-flow-record)# match flow cts destination group-tag
router(config-flow-record)# collect counter packets
Related Commands Command Description
show flow monitor Displays the status and statistics for a Flexible NetFlow flow monitor
cts role-based For Flexible NetFlow, this command has the option to attach the flow
monitor to all Layer 3 interfaces to collect statistics of traffic dropped by
SGACLs.
To Next Page
Loading...
