Cisco TrustSec - Page 160

7-74
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts
show cts
To display states and statistics related to Cisco TrustSec, use the show cts Privileged EXEC command.
show cts [
authorization entries |
credentials |
environment-data
interface {type slot/port | vlan vlan_number |
keystore |
macsec counters interface type slot/port [delta] |
pacs |
policy layer3 [ipv4 | ipv6] |
policy peer peer_id |
provisioning |
role-based counters . . . |
role-based flow . . . |
role-based permissions . . . |
role-based sgt-map . . . |
server-list |
sxp connections . . . |
sxp sgt-map . . . |
Syntax Description authorization Displays the authorization entries.
credentials Displays credentials used for CTS authentication.
environment-data Displays the CTS environment data.
interface Displays CTS interface status and configuration.
keystore Displays keystore information.
macsec Displays MACSec counters information.
pacs Displays A-ID and PAC-info for PACs in the key store.
policy Displays the CTS policy.
provisioning Displays outstanding CTS provisioning jobs.
role-based Displays Role-based Access Control information (SGACL information).