7-96
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts server-list
show cts server-list
To display the list of RADIUS servers available to TrustSec seed and nonseed devices, use the show cts
server-list command in EXEC or privileged EXEC mode.
show cts server-list
Syntax Description This command has no commands or keywords.
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History
Examples The following example displays the TrustSec RADIUS server list:
Router> show cts server-list
CTS Server Radius Load Balance = DISABLED
Server Group Deadtime = 20 secs (default)
Global Server Liveness Automated Test Deadtime = 20 secs
Global Server Liveness Automated Test Idle Time = 60 mins
Global Server Liveness Automated Test = ENABLED (default)
Preferred list, 1 server(s):
*Server: 10.0.1.6, port 1812, A-ID 1100E046659D4275B644BF946EFA49CD
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
Installed list: ACSServerList1-0001, 1 server(s):
*Server: 101.0.2.61, port 1812, A-ID 1100E046659D4275B644BF946EFA49CD
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
Related Commands
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
Command Description
cts server Displays CTS server list configuration.
To Next Page
Loading...
