7-102
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show platform cts reflector
show platform cts reflector
To display the status of the Cisco TrustSec reflector mode (Ingress, Egress, Pure, or No CTS) on a
specific interface, use the show platform cts reflector command.
show platformcts reflector interface type slot/port
Syntax Description
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History
Related Commands
interface type slot/port Specifies the interface type, slot and port for which to display status.
Release Modification
12.2(50) SY This command was introduced on the Catalyst 6500 Series Switches.
Command Description
platform cts Enables the TrustSec egress or ingress reflector.
To Next Page
Loading...
