LAB 7B: Wireless
Cisco Unified Communications Technical Training
Page 130 of 171
9) Create the voice SSID on the external access point you just added.
In the ap.cisco.com Wireless (SSIDs) window, click Create.
1) Set the VLAN ID to 100 if you are creating an SSID for voice,
2) Set the VLAN ID to 1 if you are creating an SSID for data.
3) In the Security field, you must select WPA2-PSK.
4) In the WPA Pre-Shared Key field, enter the password to use for the SSID you are creating.
5) Click OK to apply the changes.
To Next Page
Loading...
General